Modem Parameters

Configuring Your Modem You need to telnet into the RCST with a cross over cable using the default IP address, and enter the following commands exactly as you see them:(PLEASE NOTE THE NEW PARAMETER "DVB" THAT NEEDS TO BE CHECKED BEFORE ATTEMPTING TO POINT THE ANTENNA) MODEM PARAMETERS FOR IS-14: save -f 1550000 save -s 30000000 save -c 0x1029 save -pcr 0x365 save -pop 0x011e0001 save -o 1 save -t -30 save -lnbv 18 save -dvb 1 [NOTE: This will make your modem DVBS2] hw After you enter the command "hw", the modem will reboot, and once it comes back on line, the sat "LED" should start blinking (providing you are locked on IS-14). At this point, give us a call at NOC (905)573-9449 Good luck and if you have any further questions, please do not hesitate to contact us here at the NOC. Thank you. noc@fobsky.com Phone: + (905)573-9449