Modem Parameters

Configuring Your Modem You need to telnet into the RCST with a cross over cable using the default IP address, and enter the following commands exactly as you see them:(PLEASE NOTE THE NEW PARAMETER "DVB" THAT NEEDS TO BE CHECKED BEFORE ATTEMPTING TO POINT THE ANTENNA) MODEM PARAMETERS FOR IS-907: save -f 1046640 save -s 12714500 save -c 0x1029 save -pcr 0x365 save -pop 0x011e0001 save -o 1 save -t -30 save -lnbv 18 save -dvb 0 hw After you enter the command "hw", the modem will reboot, and once it comes back on line, the sat "LED" should start blinking (providing you are locked on IntelSat 907). At this point, give us a call at NOC (905)573-9449 Good luck and if you have any further questions, please do not hesitate to contact us here at the NOC. Thank you. noc@fobsky.com Phone: + (905)573-9449